Type D Oil Gun – High pressure steam or air atomized

Faber’s high pressure steam or air atomized oil guns fire light or heavy oils with both atomizing media with no combustion performance compromise. Although plant air is typically used for a cold start-up when no atomizing steam is available, it can also be used for continuous operation. Less costly steam atomization is typically used at all times when it is available. Atomization media pressure requirements at full capacity range from 75 to 125 psig.

• Heat input range 120 to 200 MMBTU/Hr.
• Used as the main burner in air registers

Specs:

• Heat input range 120 to 200 MMBTU/Hr.
• Used as the main burner in air registers
• Steam or air atomized
• Designed for fuels with a viscosity of 200 ssu or less
• Requires atomizing differential pressure control, with a 15 to 22 psig differential on #6 fuel oil, or a constant atomizing pressure of approximately 80 psig on #2 fuel oil
• Uses either internal, or external mix atomizers depending on application