Product Main
WB Package Burners
LxE Package Burners
Faber View SCADA
BMS Systems
Control Systems
Ignitors
Atomizers
Order Parts Online

Faber Home
Company Main
Company History
The Faber Advantage
Driving Directions
Employment
Faber Links
Faber News
Contact Us

Support Main
Spare Parts
Services
Helpful Information
Rep Login
Contact Us

Propane Ignitor - PPI

Back to Ignitors


Click image to view full-size.

Faber’s PPI-268 portable propane ignition system is designed to ignite your forced draft burner if your existing pilot system fails due to component failure or loss of natural gas service. In the time it takes your boiler to re-purge, this unit can be removed from the charger, wheeled to the burner front, and placed in position to light your burner. The button-activated handheld pilot fits down the sight port of any burner with a 2-1/2” I.D. or larger sight port. The PPI-268 delivers up to 268,000 BTU/hr heat input (enough to ignite the main oil flame on a typical forced draft burner) and will stay lit when exposed to burner throat velocities of up to 6,000 feet-per-minute. Powered by a 12 volt battery, Faber’s PPI-268 can deliver 55 “light-offs” on a single charge. The PPI-268 is fueled by two 14.1 oz disposable propane bottles which contain enough fuel for 17 “light-offs” at full pilot capacity or up to 55 “light-offs” at reduced pilot capacity.

Designed for safe and practical use, Faber’s PPI-268 is equipped with a keyed ignition switch, 10-inch wheels for easy transport, and a handle assembly that conveniently stows the hand-held pilot. The PPI-268 arrives ready for service at your facility with battery, charging unit, two 14.1oz propane bottles, and an operating/instruction manual. Typical delivery is 4 to 6 weeks.

SPECIFICATIONS:
Heat Input268,000 BTU/hr Max. (Adjustable)
Pilot Length5 feet
Pilot Weight9 lbs
Overall Weight98 lbs
FuelPropane, (2) - 14.1oz bottles
Battery12V – 12 Amp-Hours
Charger1 Amp Smart Charger/Maintainer
(Charges a dead battery in 2 hours)


OPTIONAL EQUIPMENT:
Hardware Kit to Add a 2-1/2” Sight Port to any Burner – Model #R-17-K This kit includes the following: R-17 casting complete with 2-1/2” clear sight glass, Thumb screw, Pivot bolt, and Installation template & instructions.

Tools to Install Sight Port Kit – Model #R-17-T
This kit includes the tools necessary to install the R-17-K sight port kit: Hole Saw, Drill Bit, and Tap. Back to Ignitors


Return to Faber Burner Main Page

© 2008 Faber Burner Company - World-Class Combustion Equipment
The Engineer Company - A Division of Faber Burner Company