Oil Atomizer - Type C

Click image to view full-size.

High pressure steam or air atomized oil guns
Faber’s high pressure steam or air atomized oil guns fire light or heavy oils with both atomizing media with no combustion performance compromise. Although plant air is typically used for a cold start-up when no atomizing steam is available, it can also be used for continuous operation. Less costly steam atomization is typically used at all times when it is available. Atomization media pressure requirements at full capacity range from 75 to 125 psig.

“UL Listed” oil burner

Heat input range 40 to 150 MMBtu/hr

Used as the main burner in air registers

Specs:

Heat input range 40 to 150 mmBtu/hr
“UL Listed” oil burner
Used as the main burner in air registers
An insulated oil tube is used for guns firing #2 oil with steam atomization
Steam or air atomized.
Designed for fuels with a viscosity of 200 ssu or less. Use orifice bushing P/N oc-70 for fuels with a viscosity of 35 to 50 ssu.
Optional clean out valve assembly P/N B4.
Requires atomizing differential pressure control. Approximately 15 psig differential for #2 Oil and 20 psig differential for #6 oil.

Click image to view full-size.

Back to Atomizers

Return to Faber Burner Main Page